Aaaconfig - HP StorageWorks 2/16 - SAN Switch Manual

aaaconfig

Configures the RADIUS server settings.
Syntax
aaaconfig ["--actions"]
Availability
Admin
Description
Use this command to accomplish the following:
The configuration applies to a single switch instance only.
Operands
This command has the following operands:
--show
--add server_IP
--remove server_IP
--change server_IP
[-p port]
[-s secret]
[-t timeout]
[-chap | -pap]
--move server_IP
to_position
--radius
[on | off]
Fabric OS 3.x Document Addendum
Display the current RADIUS configuration.
Add and delete new RADIUS servers.
Modify an existing RADIUS server configuration.
Enable and disable the RADIUS configuration.
Lists current RADIUS configurations. This information
includes the RADIUS servers, port numbers, protocol, and
so forth. The operand appears whether or not the RADIUS
and switch database configuration are enabled.
Adds a new RADIUS server. The minimum required field is
the IP address of the server. All other fields use defaults:
port to 1812, timeout to 3 seconds, and protocol to CHAP.
The server is added to the end of the list. No more than five
RADIUS servers can be configured.
Deletes the specified RADIUS server, if it exists.
Changes the specified server attributes. The operand
server_IP is mandatory. If any attributes are specified,
they are updated.
Moves the specified server to a specific position in the list
of servers. The --show operand displays the current
position of the servers.
Enables or disables the RADIUS configuration. If enabled,
all login attempts are first attempted through the RADIUS
servers configured. If disabled, the servers are not accessed
and users are authenticated from the switch database.
Fabric OS reference guide
155