Configure Application Attributes - HP StorageWorks 2/16 - SAN Switch Manual

Fabric OS reference guide
Special Inputs
Special inputs are:
Carriage return
Interrupt
End-of-file
Application Attributes
HTTP, SNMP, and RPCd are configurable. By default, all three attributes are enabled.
specifies the attributes for applications that can be changed.
Table 20: Configure Application Attributes
Application
http
snmp
rpcd
Operands
None
172
When entered alone at a prompt without any preceding
input, the command accepts the default value (if
applicable) and moves to the next prompt.
Aborts the command immediately and ignores all changes
made.
When entered alone at a prompt without any preceding
input, terminates the command and saves any changes.
Field
HTTP Enabled Boolean
SNMP Enabled Boolean
RPCd Enabled Boolean
Type Default
1 0 or 1
1 0 or 1
1 0 or 1
Fabric OS 3.x Document Addendum
Table 20
Range