HP StorageWorks 2/16 - SAN Switch Manual page 76

Diagnostic and system error messages reference guide
AUTH-AUTHCFGCHANGE
Message
<timestamp>
INFO AUTH-AUTHCFGCHANGE, 4, <text message>
Probable Cause
The authentication type or the group type was modified. The text message can display the
following information:
Recommended Action
Verify that this change was intended. If the change was intended, no action is required.
Severity
INFO
AUTH-AUTHCFGERROR
Message
<timestamp>
ERROR AUTH-AUTHCFGERROR, 2, <text message>
Probable Cause
The authentication type or the group type was not set. The text message can display the
following information:
Recommended Action
Usually this problem is transient. Retry the command.
If the command fails consistently, copy the message, collect switch information using the
supportshow command, and contact your switch service provider.
Severity
ERROR
76
Authentication type was successfully set to fcap, dhchap, or fcap, dhchap.
Group type was successfully set to 0, 1, 2, 3, 4 or 0,1,2,3,4.
Failed to set authentication to either fcap, dhchap, or fcap, dhchap.
Failed to set group type to either 0, 1, 2, 3, 4 or 0,1,2,3,4.
Fabric OS 3.x Document Addendum