When User Authentication Is Enabled - Sharp MX-3114N Operation Manual

When User Authentication is Enabled

When "User Authentication
When auto login is enabled, the login screen will not appear.
When user authentication is by login name and password (and e-mail
address)
Administrator login is performed in the user selection screen. For more information on the login procedure when user
authentication is enabled, see
Device Account Mode User Selection
6 12 18
Name 1
Name 3
Name 5
Admin Login
1
Name 7
Direct Entry
Name 9
Name 11
All
ABC
User
User Authentication
Login Name
User Name Administrator
Password
Auth to:
Login Locally
2
(1)
• If login name / password / e-mail address is selected for the authentication method, the [E-mail Address] key will
appear below the "User Name".
• For the factory default administrator password, see "TO THE ADMINISTRATOR OF THE MACHINE" in the Start
Guide.
• This completes the administrator login procedure. The system settings (administrator) can be used.
Setting" (page 7-47) is enabled, follow the procedure below to log in.
"USER AUTHENTICATION" (page 1-17) in "1. BEFORE USING THE MACHINE".
Back
Name 2
Name 4
Name 6
Name 8
Name 10
Name 12
ABCD EFGH IJKL MNOP QRSTU VWXYZ
OK
(2)
Touch the [Admin Login] key.
1 1
2 2
etc.
Log in.
(1) Touch the [Password] key.
Enter the administrator password in the administrator
password entry screen.
(2) Touch the [OK] key.
7-29
SYSTEM SETTINGS
Contents