Changing The Paper Size Used For A Print Job - Sharp MX-3114N Operation Manual

Changing the paper size used for a print job

Paper Empty
Paper Empty
1 Check details on the job.
Print Job Scan to
Job Queue Sets / Progress
1 Copy 020 / 001
2 Computer01 020 / 000
3 Copy 002 / 000
4 1234567890 001 / 000
Detail
Computer01 020 / 000
Colour / B/W: B/W
A5
Paper: Paper Select
Plain
2 Change the paper size used for the job.
Paper Select
Paper Tray
1. A4
2. A4R
3. B4
4. A3
When the size of paper specified for a print job is not loaded in any of the
machine's paper trays, follow the steps below to change the paper size.
Fax Job
Internet Fax
Status
Spool
Copying
Job Queue
Paper Empty 1
Complete
1
Waiting
Waiting
Detail
Priority
Stop/Delete
OK
Paper Empty
Output:
Special
Modes:
OK
Bypass Tray
Plain
Plain
Plain
Plain
Plain
Touch the [JOB STATUS] key
display the job status screen.
Select the job whose status is [Paper Empty] and touch
the [Detail] key.
To delete the job, you can press the [Stop/Delete] key.
Check the paper size specified for the job in the detail
screen, and touch the [Paper Select] key.
Select the paper size on which you wish to print the job
from the set paper sizes.
To avoid cutting off part of the image, select a paper size
that is larger than the paper size specified for the job.
8-6
TROUBLESHOOTING
on the touch panel to
( )
Contents