Sharp MX-3114N Operation Manual page 239

130 pages of original
have been scanned.
Copy the scanned data?
4
If the displayed number of original sheets is different from the actual number of original sheets...
Press the [STOP] key (
To cancel the original count mode setting...
Touch the [Original Count] key in the screen of step 2 so that it is not highlighted.
Cancel OK
).
2-130
After scanning is finished, check the
number of sheets that were scanned and
touch the [OK] key.
Copying will begin.
• When job build mode is used, the number of scanned sheets
appears when the [Read-End] key is touched.
• The number that is displayed is the number of scanned
original sheets, not the number of scanned original pages.
For example, when two-sided copying is performed using
one original, the number "1" will appear to indicate that one
original sheet was scanned, not "2" to indicate the front-side
page and the reverse side page.
COPIER
Contents