Sharp MX-3114N Operation Manual page 542

Specifying the send size of the image
Specify the send size as a paper size. If a send size bigger than the scan size is selected, the image will be enlarged. If
a send size smaller than the scan size is selected, the image will be reduced.
• The send size cannot be specified when [Long Size] is selected for the scan size, or when the scan size is specified by
numerical values.
• The send size cannot be specified when [TIFF-S] is selected for the format in Internet fax mode. (The send size is fixed at
A4R (8-1/2" x 11"R).)
Select the mode and display the image settings screen.
(1) Touch the tab of the mode that you wish to use.
1
(2) Touch the [Original] key.
☞
IMAGE SETTINGS
Scan/Original
Scan Size
Auto
2
2-Sided 2-Sided
Booklet Tablet
Scan/Original
Auto
Manual
Manual
A5
A5R
B5
3
216x340 216x343
• Depending on the paper size specified for the "Scan Size", it may not be possible to select some sizes for the "Send
Size". Size keys that cannot be specified for the "Send Size" are greyed out to prevent selection.
• To specify an Inch size for the send size, touch the [AB
send size.
(page 5-53)
OK
100% Send Size
A4 Auto
Image Orientation
(1) (2)
OK
B5R B4
AB
A4 A3
Inch
A4R
Touch the [Send Size] key.
Specify the send size.
(1) Touch the desired send size key.
(2) Touch the [OK] key.
Inch] key to highlight the [Inch] side and then specify the
5-59
SCANNER/INTERNET FAX
Contents