I-Fax Settings; Transaction Report Print Select Setting; Auto Wake Up Print; Speaker Volume Setting - Sharp MX-3114N Operation Manual

I-Fax Settings

These settings can be configured when the Internet fax expansion kit is installed.
I-Fax Default Settings
These settings are used to configure the default settings
for Internet fax.

Auto Wake Up Print

When the [POWER] key (
power switch is "on") and an Internet fax is received, this
function activates the machine and prints the fax.
When this function is disabled, received Internet faxes
are not printed until the [POWER] key (
"on".
Compression Setting
This is used to set the default compression mode for
Internet fax transmission.
The settings are shown below.
• MH (G3)
• MMR (G4)

Speaker Volume Setting

This is used to adjust the volume of fax receive signals
and communication error signals heard through the
speaker.
A fax receive signal sounds after the machine checks
the mail server and retrieves received faxes. A
communication error signal sounds when a delivery
failed e-mail is received from the destination Internet fax
machine.
Original Print on Transaction
Report
When a transaction report is printed, this is used to print
part of the first page of the transmitted original on the
transaction report. Select one of the settings below.
• Print Out All Report
• Print Out Error Report Only
• No Printed Report
This setting will not be effective if
Print Select Setting" below is set to "No Printed Report".
) is "off" (but the main
) is switched
"Transaction Report
Transaction Report Print Select
Setting
This is used to select whether or not a transaction report
will be printed, and if printed, the condition for being
printed. Select a setting for each of the following
operations:
Single Sending
• Print Out All Report
• Print Out Error Report Only
• No Printed Report
Broadcasting
• Print Out All Report
• Print Out Error Report Only
• No Printed Report
Receiving
• Print Out All Report
• Print Out Error Report Only
• No Printed Report
When a transaction report is printed, you can have part
of the first page of the transmitted original printed on the
transaction report. For more information, see
Print on Transaction
7-87
SYSTEM SETTINGS
"Original
Report".
Contents