Sharp MX-3114N Operation Manual page 393

Specifying the original scan size (by paper size)
If the original is a non-standard size or you wish to change the scan size, touch the [Original] key to specify the original
size manually. Place the original in the document feeder tray or on the document glass and follow the steps below.
Touch the [Original] key.
1
The automatically detected original size appears to the right of the [Original] key.
☞
IMAGE SETTINGS
Fax/Original
Scan Size
Auto
2
2-Sided
2-Sided
Tablet
Booklet
Fax/Original
Auto
Manual
Manual
A5
A5R
B5
3 216x340 216x343
Size Input
• If you are sending a long original, touch the [Long Size] key. Use the automatic document feeder to scan a long
original. The maximum length that can be scanned is 1000 mm (39-3/8") (the maximum height is 297 mm
(11-5/8")).
☞
TRANSMITTABLE ORIGINAL SIZES
• To specify an Inch size for the scan size, touch the [AB
scan size.
(page 4-46)
OK
100% Send Size
A4 Auto
Image Orientation
(1) (2)
OK
B5R B4
AB
A3
A4
Inch
A4R Long Size
Touch the [Scan Size] key.
Specify the scan size.
(1) Touch the appropriate original size key.
(2) Touch the [OK] key.
(page 4-29)
Inch] key to highlight the [Inch] side and then specify the
4-49
FACSIMILE
Contents