Other Problems - Sharp MX-3114N Operation Manual

OTHER PROBLEMS

Problem
Preview images or
thumbnail images do
not appear.
The touch panel
screen is difficult to
view.
You were logged out
without having
performed logout
yourself.
You forgot the
administrator
password.
You cannot save data
in a folder for the NAS.
Point to check
Are there a number of jobs waiting to be
executed?
Is the display contrast properly
adjusted?
Did Auto Clear activate?
Was the administrator password
changed from the factory default
setting?
Amount of data in the folder has
exceeded the upper limit.
Wait until several of the jobs have been executed.
Touch the brightness adjustment key (
system bar in the touch panel to adjust the
brightness.
☞
1. BEFORE USING THE MACHINE
BAR" (page 1-13)
Log in again.
When user authentication is used, the currently logged
in user will be automatically logged out if Auto Clear
activates. (Except when in PC scan mode.)
If you are the administrator, you can change the time
setting of Auto Clear or disable Auto Clear in "Auto
Clear Setting".
➞ System Settings (Administrator) > "Operation
Settings" > "Other Settings" > "Auto Clear Setting"
Contact your dealer or nearest authorised service
representative.
For the factory default administrator password, see "TO
THE ADMINISTRATOR OF THE MACHINE" in the Start
Guide. After changing the password, take special care
to remember it.
Delete some files to reduce the amount of data.
8-47
TROUBLESHOOTING
Solution
) on the
"SYSTEM
Contents