Frequently Asked Questions; Making A Copy Of A Non-Standard Size Original - Sharp MX-3114N Operation Manual

Hide thumbs Also See for MX-3114N:
Table of Contents

Advertisement

FREQUENTLY ASKED QUESTIONS

Making a copy of a non-standard size original

1 Place the originals.
3 Place paper in the bypass tray.
The bypass tray is used here to copy
onto paper that is not loaded in any of
the paper trays of the machine.
The procedure for making a copy of a payment slip or other non-standard size
original is explained below.
The "Centring" special mode of copy mode can be selected to position the copied
image in the centre of the paper.
If the X dimension
(width) of the
document is less than
140 mm (5-1/2") or
the Y dimension
(height) is less than
131 mm (5-1/8"),
place the original on
the document glass.
For a thin original,
use "Slow Scan
Mode".
Type : Recycled
Size : A4
2 Enter the original size.
From the base screen of copy mode,
touch [Original] then [Size Input].
Original
Size Input
4 Select the bypass tray.
From the base screen of copy mode, touch [Paper
Select] and then "Bypass tray paper type".
Paper Select
Bypass Tray Type/Size Setting
Select the paper type.
Plain
Pre-Printed
Pre-Punched
Heavy Paper 1
Heavy Paper 2
Envelope
Glossy Paper
Heavy Paper 1: 106 - 209 g/m
Heavy Paper 2: 210 - 256 g/m
Paper Select
Paper Tray
1.
A4
2. A4R
3. B4
4. A3
8-3
TROUBLESHOOTING
OK
Cancel
OK
X
200
(25-432)
mm
Y
150
(25-297)
mm
Cancel
1
2
Recycled
Letter Head
Colour
Thin Paper
Labels
Transparency
Tab Paper
2
(28 lbs.bond, -110 lbs.index)
2
(110 - 140 lbs.index)
OK
Bypass Tray
A4
Plain
Recycled
Plain
Plain
Plain
Contents

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Mx-2615nMx-3115n

Table of Contents