Connection Type Switching; Wireless Settings; Nas Setting - Sharp MX-3114N Operation Manual

Connection Type Switching

Specify the network connection type (wired or wireless).
For wireless communication via an access point, select "Wireless (Infrastructure Mode)". (A wired connection already
being established at this time will be disabled.)
For wireless communication between devices without using an access point, select "Wired + Wireless (Ad-hoc Mode)".
For wired connection only (without any wireless communication), select "Wired Only".
• If "Wired + Wireless (Ad-hoc Mode)" is selected, only the following functions and operations are available for devices
connected to the machine:
- Browsing Web pages of the machine
- Printer functions
- Scanner functions
- Remote operations
- SMB server functions
- mDNS
• This function is not available in some countries and regions.

Wireless Settings

Configure settings to connect the network using a wireless connection.
• [Change Setting] key
Tap this key to save an access point used to establish a wireless connection.
• [Initialize] key
Tap this key to reset wireless settings to the factory default.
If "Wired + Wireless (Ad-hoc Mode)" is selected in [Connection Type Switching], the following items can also be
selected:
• Selecting a connecting client
• [Opening] key
Tap this key to release the IP address or MAC address.
This function is not available in some countries and regions.

NAS Setting

The "shared" folder of the MFP can be accessed as a network folder from a network PC.
Item
shared If the [Use of Storage] is set to [Allowed], you can use the "shared" folder as a network folder.
• This cannot be set on the machine. Set this in the network settings in the Web pages.
• We recommend you backup the data frequently.
• A maximum of 500 files can be stored in a folder.
• This function requires 120 GB of available HDD space.
("REMOTE OPERATION OF THE MACHINE" (Page 1-23))
Description
7-77
SYSTEM SETTINGS
Contents