Printing On An Envelope - Sharp MX-3114N Operation Manual

Printing on an envelope

The procedure for printing on an envelope is explained below. Only the name and
address side of an envelope can be printed on.
It is recommended that you do a test print to check the print result before using an
envelope.
1 Place paper in the bypass tray.
3 Select settings in the printer driver.
(1)
Print on the name
and address side
(2)
(3)
(4)
(5)
2 Tray Settings.
Tray Settings
Type
Size
Fixed Paper Side Disable Duplex
Copy Print
Type : Envelope
Size : Select the envelope size
(1) Click the [Paper] tab.
(2) Select the size of the envelope in
"Paper Size".
(3) Select "Bypass Tray" from "Paper
Source" in "Paper Selection".
(4) Select [Envelope] in "Paper Type".
If needed, select the "Rotate 180 degrees"
checkbox ( ) in "Image Orientation" on the
[Main] tab.
(5) Click the [OK] button.
8-5
TROUBLESHOOTING
Bypass
Envelope
Change
DL
Paper Property
Disable Staple Disable Punch
Feeding Approved Job
Fax I-Fax Doc. Filing
Contents
Back
5
5