Default Settings; Clock Adjust - Sharp MX-3114N Operation Manual

Default Settings

The default settings for operation of the machine can be configured. Touch the [Default Settings] key and select the settings.

Clock Adjust

Use this to set the date and time in the machine's built-in clock.
Set the time.
Item
Specify Time Zone
Date&Time Settings
Synchronize with Internet Time Server
Daylight Saving Time Setting
Enable daylight saving time.
Item
Daylight Saving Time Setting
Select Setting Type
Start Time
Completing Time
Adjustment Time
When this function is used, the time changes at the beginning and end of daylight saving time as indicated in the table
below.
Area
Europe*
Australia, New Zealand
Other countries
* In some countries, the starting and ending times of daylight saving time may be different than the times set in the machine.
If your region is ahead of GMT (Greenwich Mean Time), select [+]. If your region is
behind GMT, select [-]. Next, specify the time difference between your region and
GMT in hours and minutes.
Select and set the year, month, day, hour, and minute.
This can be used when the machine is connected to the Internet. The machine's time
is automatically adjusted to the time of an Internet time server.
Select whether or not the Daylight Saving Time Setting is enabled. If disabled, the
following settings will not be possible.
Specify whether the starting and ending day of daylight saving time are to be set
using the day of the week or the date.
Set the starting time of daylight saving time. Set the starting month. If you selected "Day
of the Week" in "Select Setting Type", set the starting week of daylight saving time and
then the starting day. If you selected "Date" in "Select Setting Type", set the starting date.
Set the hour and minute and the UTC (Coordinated Universal Time) setting.
Set the ending time of daylight saving time in the same way as you set the starting
time.
Set the time that adjustment will take place when daylight saving time begins.
Standard time ➞ Daylight saving time
Last Sunday in March, 1:00 to 2:00 AM
Last Sunday in October, 2:00 to 3:00 AM
Select the [Daylight Saving Time Setting] checkbox so that a checkmark
setting is configured to normal time plus one hour. When the
normal time.
7-11
SYSTEM SETTINGS
Settings
Settings
Daylight saving time ➞ Standard time
Last Sunday in October, 1:00 to 0:00 AM
Last Sunday in March 3:00 to 2:00 AM
appears. The clock
is selected, clock returns to
Contents