Sharp MX-3114N Operation Manual page 354

[R] key
When the machine is connected to a PBX, the "PBX Setting" can be enabled to automatically connect to the outside line
each time you dial normally. When the PBX setting is enabled, the [R] key appears in the base screen. To dial a number
inside your PBX, touch the [R] key before dialling to temporarily cancel the "PBX Setting".
• This Setting can only be activated in Germany.
• The [R] key can be included in a fax number stored in an one-touch key.
• When the [Speaker] key is touched, the "PBX Setting" is temporarily cancelled and the [R] key does not appear.
• When the [R] key is touched before dialling, an F-code (sub-address and passcode) cannot be used. Likewise, an
one-touch key in which an F-code (sub-address and passcode) is stored cannot be used.
System Settings (Administrator): PBX Setting
This is used to enable PBX Setting.
Scan Internet Fax Fax
Address Book
Original
Scan:
Direct TX
Exposure Auto
Sub Address
Resolution Standard
Address Review Special Modes
File
R
Quick File
Auto Reception
Preview
Fax Memory:100%
4-10
USB Mem. Scan PC Scan
Auto Auto
Send:
FACSIMILE
Contents