Moving A Stored File - Sharp MX-3114N Operation Manual

MOVING A STORED FILE

Use this procedure to change the location of a file (move a file to a different folder).
After selecting the desired file, follow the steps below.
☞
SELECTING A FILE (page 6-29)
Job Settings
file-01
Select the job.
1
Print Send
Move Delete
Job Settings / Move
file-01
Select the folder the file is moved to.
File Name file-01
Move to:
2
• A file cannot be moved to the Quick File Folder. With this procedure, the original name is changed and the file is
moved to the specified folder. (Unlike the "Save As" command on a computer, the file is not copied to the specified
folder with the original file remaining in the original location.)
• To change the file name, touch the [File Name] key.
Job Settings / Move
Main Folder
User 1
User 3
3
User 5
User 7
User 9
All Folders ABCD EFGHI
The above screen shows the custom folders as an
example.
Cancel
Name 1 A4 F. Colour
Property
Image Check
Change
Detail
Cancel
Name 1 A4 F. Colour
Move
(1) (2)
OK
User 2
1
2
User 4
User 6
User 8
User 10
JKLMN OPQRST UVWXYZ
Touch the [Move] key.
Touch the [Move to:] key.
Select the destination folder.
(1) Touch the key of the folder to which you
want to move the file.
If a password is set for the selected folder, a password
entry screen will appear.
Enter the password with the numeric keys (5 to 8 digits)
and touch the [OK] key.
(2) Touch the [OK] key.
6-41
DOCUMENT FILING
Contents