Sharp MX-3114N Operation Manual page 809

Problem
Many nonsense
characters are printed.
Point to check
Is your computer or the machine in an
unstable state?
Cancel printing, restart your computer and the
machine, and try printing again.
If little free space remains in the memory or hard drive of
your computer, or many jobs have been spooled on the
machine and it has little free memory remaining, printed
text may turn into nonsense characters.
To cancel printing
Windows:
Double-click the printer icon that appears at the lower
right of the task bar and click "Cancel All Documents"
(or "Purge Print Documents") in the [Printer] menu.
Macintosh:
Double-click the name of the machine in the printer
list, select the job that you wish to delete, and delete
it.
At the machine:
Touch the [JOB STATUS] key (
panel, touch the [Print Job] tab to change the screen,
touch the key of the print job that you wish to delete,
and touch the [Stop/Delete] key. A message appears
to confirm the cancellation. Touch the [Yes] key.
If nonsense characters are still printed after restarting,
ask your administrator to lengthen the timeout setting of
"I/O Timeout" in the system settings (administrator).
➞ System Settings (Administrator) > "Printer Settings" >
"Interface Settings" > "I/O Timeout"
If nonsense characters are still printed after taking the
above measures, remove and then reinstall the printer
driver.
8-21
TROUBLESHOOTING
Solution
) on the touch
Contents