Activity Report Print Select Setting - Sharp MX-3114N Operation Manual

Activity Report Print Select Setting

This is used to have the Image Sending Activity Report
stored in the machine's memory automatically print at
specified times.
The Image Sending Activity Report can be set to
automatically print each time the number of transactions
reaches 201, and it can also be set to automatically print
at a specified time (once a day only). (The settings can
be simultaneously enabled.)
• If you only enable the [Print Daily at Designated
Time] setting
transactions exceeds 201 before the specified time,
each new transaction will delete the oldest
transaction (the oldest transaction will not be
printed).
• The Image Sending Activity Report can also be
printed manually. See
(page 7-94) in the system settings (administrator).
Body Text Print Select Setting
Image files attached to Internet faxes are normally
printed. This setting can be enabled to also have the
e-mail body text (subject and message) printed.
This setting also applies to printing of the body text of
e-mail messages without file attachments.
A maximum of 5 pages of body text can be printed.
Pre-Setting Mail Signature
A signature can be automatically appended to the end of
the body text of e-mail. This is convenient when it is a
corporate policy to append a certain signature at the end
of e-mail.
The mail signature to be appended is configured in the
Web pages. This setting simply enables or disables the
signature.
This setting is linked to
(page 7-86) in the Scan Settings.
and the number of recorded
"List Print (Administrator)"
"Pre-Setting Mail Signature"
I-Fax Send Settings
I-Fax Send Settings are described below.
I-Fax Reception Report On/Off
Setting
This setting is used to request a reception report when
an Internet fax is sent.
The reception report is returned to the sender address
stored in "Own Name and Destination
I-Fax Reception Report Request
Timeout Setting
The duration of time that the machine will wait for a
reception report from the destination machine can be set
by any number from 1 hour to 240 hours in increments of
1 minute.
This setting is only effective when
Report On/Off
Number of Resend Times at
Reception Error
The number of resend attempts when an error message
is received from an I-Fax recipient can be set to any
number from 0 to 15.
This setting is only effective when
Report On/Off
Maximum Size of E-mail
Attachments
To prevent the transmission of excessively large image
files by Internet fax, a file size limit can be set from 1 MB
to 10 MB in increments of 1 MB. If the total size of the
image files created by scanning the original exceeds the
limit, the image files are discarded.
If you do not wish to set a limit, select [Unlimited].
• This setting is linked to
Attachments
Settings.
• This setting does not apply to the limit for direct
SMTP transmission.
7-88
SYSTEM SETTINGS
Set" (page 7-84).
"I-Fax Reception
Setting" is enabled.
"I-Fax Reception
Setting" is enabled.
"Maximum Size of E-mail
(E-mail)" (page 7-86) in the Scan
Contents