Sharp MX-3114N Operation Manual page 146

Punch function
If an optional punch module is installed, holes can be punched in output.
Paper size that can be punched is B5R to A3 (7-1/4" x 10-1/2"R to 11" x 17"). However, A3W (12" x 18") sized paper
and special media such as transparency film and tab paper cannot be used.
[Examples]
Original placement orientation (for the staple sort and punch functions)
When using the staple sort function or the punch function, the original must be placed as shown below to enable stapling
or punching in the desired position on the paper.
Staple sort
Document feeder tray
One staple (top)
abc
Two staples
abc
One staple (bottom)
[Original 1]
[Original 2]
Document glass
c b a
c b a
c b a
2-37
[Punch positions]
[Punch positions]
Punch
Document feeder tray
abc
COPIER
Document glass
c b a
c b a
Contents