Sharp MX-3114N Operation Manual page 215

Select the special modes.
(1) Touch the [Special Modes] key.
(2) Touch the
2
(3) Touch the [Image Edit] key.
(4) Touch the [Photo Repeat] key.
☞
[Image Edit] KEY (page 2-104)
Image Edit
Photo Repeat
Original Size
3
130x 90mm
3x 5"
When making repeat copies of a business card size original (up to 57 mm x 100 mm (2-1/8" x 3-5/8")), only A4
(8-1/2" x 11") can be selected for the paper size.
Press the [COLOUR START] key or the [BLACK & WHITE START] key.
Copying will begin.
If you have selected sort mode, change originals and press the [START] key. Repeat until all pages have been scanned and
then touch the [Read-End] key. (For the second original and following originals, use the same [START] key as you did for the
4
first original.
To cancel scanning and copying...
Press the [STOP] key (
• The original must be placed on the document glass.
• Only A4 (8-1/2" x 11") or A3 (11" x 17") size paper can be used.
• The copy ratio is 100% when this function is used. (The ratio cannot be changed.) However, for a business card size
original (up to 57 mm x 100 mm (2-1/8" x 3-5/8")), the images are reduced to 95%.
To cancel the photo repeat setting...
Touch the [Cancel] key in the screen of step 3.
keys to switch through the screens.
(1) (2)
OK
Cancel OK
Repeat Type
1
5
A4/8½x11 A3/11x17
4 8
).
2-106
Select Photo Repeat settings.
(1) Touch the key showing the original type
and paper size combination that you want
to use.
Touch the keys to switch through the screens and
touch the desired repeat type key (A4 or A3 (8-1/2" x 11"
or 11" x 17")).
(2) Touch the [OK] key.
You will return to the special modes screen. Touch the
[OK] key to return to the base screen of copy mode.
COPIER
Contents