Copy Function Settings; Initial Status Settings - Sharp MX-3114N Operation Manual

Copy Function Settings

The following settings are related to copying. Touch the [Copy Function Settings] key to configure the settings.
Default settings selected with these settings apply to all functions of the machine (not just the copy function).

Initial Status Settings

The copier settings are reset when the [POWER] key (
when the auto clear interval has elapsed. These settings are used to change the default settings for copy mode.
The following settings can be changed:
Item
Colour Mode Configure default colour mode settings.
Paper Tray Specify the paper tray that is selected by default.
Exposure Type Configure exposure mode settings.
Copy Ratio Specify the copy ratio that is selected by default.
Configure the 2-sided mode settings that are selected by default.
If this setting is used to change the default setting for the duplex function to other than "1-Side to 1-Side"
2-Sided Copy
and the duplex function or automatic document feeder fails or is disabled, the setting will revert to
"1-Side to 1-Side".
Output Set the print output method and output tray that are selected by default.
Return to the This returns all items to the factory default settings.
Defaults
) is turned on, when the [CLEAR ALL] key (
Description
7-72
SYSTEM SETTINGS
) is pressed, or
Contents