Sharp MX-3114N Operation Manual page 387

Resending to unsuccessful broadcast transmission destinations
The results of a completed broadcast transmission can be checked in the job status screen. If transmission to any of the
destinations failed, resend the fax to those destinations.
1
Print Job Scan to
Address Set Time
1 Broadcast0001 10:00 04/01 020/003 Connecting
2 10:05
0123456789
3 AAA AAA 10:22
4 10:30
BBB BBB
5 Broadcast 10:33
2
If the broadcast transmission included destinations of different modes, the same broadcast transmission key will
appear in each of those modes.
(1)
Print Job Scan to
Address Start Time
Broadcast0001 10:00 04/01 010/003 NG000000
Broadcast0002 10:05
CCC CCC 10:22
0123456789 10:30
3
"Broadcastxxxx" will appear as the destination of the broadcast job key. The job control number that appeared in the
touch panel when scanning ended appears in "xxxx".
Fax Job Internet Fax
Pages Status
Job Queue
04/01 000/004 Waiting 1
Complete
1
04/01 000/004 Waiting
04/01 000/010 Waiting
04/01 000/010 Waiting
Detail
Priority
Stop/Delete
(2)
Fax Job
Pages Status
Job Queue
1 Complete
04/01 001/001 Send OK
1
04/01 004/004 Send OK
04/01 010/010 Send OK
Detail
Call
Touch the [JOB STATUS] key (
Touch the [Complete] key.
If the job status screen of fax mode does not appear, touch the
[Fax Job] tab.
Display details on the broadcast
transmission.
(1) Touch the key of the completed broadcast
transmission.
(2) Touch the [Detail] key.
4-43
FACSIMILE
).
Contents