System Setup - Canon imagePROGRAF iPF815 User Manual

Printer Parts > Control Panel

System Setup

Warning
Keep Paper Size
9
Paper Size Basis
732
Main Menu Settings
>
Setting Item
Buzzer
Detect Mismatch
Skip Take-Up Err
Sht Selection 1
Sht Selection 2
Description, Instructions
Set the buzzer. Choose On for the buzzer to sound once
for warnings and three times for errors.
Choose Warning for notification (display of a warning
message) during printing if the paper type specified in the
printer menu does not match the paper type in the printer
driver. Choose None to continue to print without notifica-
tion. Choose Pause to have printing paused under these
circumstances. In this case, you can continue printing by
pressing the Online button.
Choose On to continue with printing even if an error oc-
curs with the Media Take-up Unit. Choose Off to have the
printer pause before printing if a rewinding error occurs.
Choose On to use the paper size setting as the basis for
printing instead of other settings. The margin setting of the
printer menu will be used instead of the margin setting of
the printer driver if the latter is smaller, which may pre-
vent text or images in the margin from being printed.
Choose Off to use the printer driver settings instead. Even
if the margin setting of the printer driver is smaller than
that of the printer menu, text or images will not be cut off.
However, this requires longer paper because the actual
margin will be equal to the margin setting of the printer
driver plus the margin setting of the printer menu.
If sheet size detection is activated, choose whether ISO
A3+ or 13"x19"(Super B) is applied when an intermedi-
ate size is detected.
If sheet size detection is activated, choose whether ISO
B1 or 28"x40" (ANSI F) is applied when an intermediate
size is detected.
iPF815