Canon imagePROGRAF iPF820 User Manual page 73

Hide thumbs Also See for imagePROGRAF iPF820:
Table of Contents

Advertisement

Setting Item
Smoothing
Line Width
ThickenFineLines
AdjustFaintLines
Auto Rotate
Nesting
Use Nesting
Nesting WaitTime
Cut Lines
On-the-Fly
*1: It is not possible to match the colors and image quality produced by the specied printer exactly.
*2: Because HP RTL images are not rotated even if the paper is rotated 90 degrees, images may be cut off
or the blank paper may be ejected. In this case, set Auto Rotate to Off.
Description, Instructions
If you choose Smooth
Choose the width for printing lines if no width is specied in the
data. Dots in the line width are 300 dpi each.
Select On to print ne lines more distinctly.
If ne lines are printed in colors that do not match the colors
of other shapes, selecting Off may help produce the expected
results. However, lines in some colors may appear broken.
If the long side of an original is shorter than the roll width, the
original is automatically rotated 90 degrees to conserve paper.
Similarly, if the long side of an original in landscape orientation is
longer than the roll width and the short side is shorter than the
roll width, the original is repositioned to t on the paper.
HP RTL print jobs are not rotated.(*2)
Selecting On will store print jobs until multiple documents can be
arranged to ll up the roll width, instead of printing each print
job as it is received.
Specify a time to wait until printing, as desired.
Select On to print cut lines between each document on the roll.
Selecting On will start printing jobs sooner if you are printing
only HP RTL print jobs and printing would not start until later.
However, images may be omitted in some cases, so be sure
to check the printing results.
Control Panel
Printer Parts 59

Advertisement

Table of Contents
loading

This manual is also suitable for:

Imageprograf ipf820 proIpf820

Table of Contents