The Surface Of The Paper Is Dirty; The Back Side Of The Paper Is Dirty - Canon imagePROGRAF iPF820 User Manual

Hide thumbs Also See for imagePROGRAF iPF820:
Table of Contents

Advertisement

Problems with the printing quality

The surface of the paper is dirty

The Paper Retainer is soiled.
You are using a paper that does not dry easily.

The back side of the paper is dirty

The Platen has become dirty after borderless printing
or printing on small paper.
The Platen has become soiled due to printing on the
Platen because width detection is deactivated.
The Paper Retainer is soiled.
624 Troubleshooting
Cause
Cause
Corrective Action
Clean the Paper Retainer.
(→P.597)
Specify a time of about a minute in Roll DryingTime.
Corrective Action
Open the Top Cover and clean the Platen.
(→P.597)
Set CarriageScanWdth to Fixed.
Activate width detection, and open the Top Cover and
clean the Platen.
(→P.597)
Open the Top Cover and clean the Platen. After this,
manually advance the roll onto the Platen before
printing.
(→P.597)
(→P.135)
Clean the Paper Retainer.
(→P.597)

Advertisement

Table of Contents
loading

This manual is also suitable for:

Imageprograf ipf820 proIpf820

Table of Contents