Canon imagePROGRAF iPF820 User Manual page 625

Hide thumbs Also See for imagePROGRAF iPF820:
Table of Contents

Advertisement

4.
If the Cutter is out, move the Cutter to the right side, away from the paper.
Important
If the Cutter is on the left side, be sure to move it to the right. If the Cutter is on the left side when you
turn the printer on, the printer may rip the paper.
5.
Lift the Release Lever.
6.
Holding the paper on both sides, pull the jammed portion out toward the front. Use a scissors or
cutting tool to cut away the printed or wrinkled portion.
Caution
When cutting paper, be careful to avoid scratching the printer.
Problems Regarding Paper
Troubleshooting 611

Advertisement

Table of Contents
loading

This manual is also suitable for:

Imageprograf ipf820 proIpf820

Table of Contents