Canon imagePROGRAF iPF820 User Manual page 36

Printer parts
f. Feeder Selection Button
Switches the paper source. Each time you press this button, the paper source switches between the
roll and the sheet, and the corresponding lamp on the Paper Source Section is lit.
g. Display Screen
Shows the printer menu, as well as the printer status and messages.
h. Color Label
This label indicates the Ink Tank color. The label corresponds to the ink level on the Display Screen.
i. HDD lamp (Green)
•
•
j. ◄ Button
Menu mode: Press this button to display the menu one level higher.
k. ▲ Button
Ofine: Press this button to rewind rolls manually. (→P.135)
Menu mode: Press this button to display the previous menu item or setting value.
l. ▼ Button
Ofine mode: Press this button to feed the roll manually in the direction of ejection, as needed.
(→P.135)
Menu mode: Press this button to display the next menu item or setting value.
m.► Button
Menu mode: Press this button to display the menu one level lower.
n. OK Button
In Menu mode, press this button to conrm or execute the selected item or setting. Also press this
button if the Display Screen indicates to press the OK button.
o. Information Button
Displays printer submenus. Press this button to display information about ink, paper, and so on.
(→P.67)
You can also hold down this button for three seconds to clean the Printhead ( Head Cleaning A ).
p. Power Button
Turns the printer on and off. (→P.25)
q. Load/Eject Button
By pressing this button, you can check instructions on loading and removing paper. Instructions for
loading paper are shown on the Display Screen if pressed when no paper is loaded, and instructions
for removing paper are shown if paper is loaded.
r. Stop Button
Hold down for at least a second to cancel print jobs in progress or end the ink drying period.
Note
•
In Sleep mode, you can press any button except the Power button to bring the printer online again.
22 Printer Parts
On
Indicates the printer is accessing the hard disk.
Off
Indicates the printer is not accessing the hard disk.