Turning The Printer On And Off - Canon imagePROGRAF iPF820 User Manual

Hide thumbs Also See for imagePROGRAF iPF820:
Table of Contents

Advertisement

Turning the Printer On and Off

Turning the printer on
1.
Press the Power button to turn on the printer.
The printer will now start up.
After the Display Screen shows the Canon logo, Starting up... Please wait. is displayed.
2.
The printer goes online in preparation for printing after startup, and the Online lamp and paper
source section lamp remain lit.
The printer will not go online in the following situations. Take action as needed.
The Top Cover is open
Close the Top Cover.
The Ink Tank Cover is open
Close the Ink Tank Cover.
The Printhead is not installed
Please see "Replacing the Printhead". (→P.579)
Ink Tank is not installed
Please see "Replacing Ink Tanks". (→P.563)
"ERROR" is shown on the Display Screen
Turn off the printer and contact your Canon dealer.
The Online lamp and Message lamp are not lit (even once), and nothing appears on the Display
Screen
Make sure the printer is plugged in correctly. Check the connection at the plug and electrical outlet.
No paper is loaded
Load paper. (→P.89) (→P.93)
Important
Starting the printer when it is connected via the USB cable to a Macintosh computer that is off may
cause the computer to start up at the same time. To prevent this, disconnect the USB cable before
starting the printer. Connecting the printer to the computer via a USB hub may solve this issue.
Control Panel
Printer Parts 25

Advertisement

Table of Contents
loading

This manual is also suitable for:

Imageprograf ipf820 proIpf820

Table of Contents