Maintenance Cartridge
6.
Hold the Shaft Cleaner on the right side of the Carriage by the grips (a) and pull it toward you to
remove it.
Important
•
Do not touch the Linear Scale (a), Carriage Shaft (b), or Ink Tube Stabilizer (c). Touching these
parts may damage them.
7.
After removing the cap of the new Shaft Cleaner, hold it by the grips (a) and attach it to the
Carriage.
Push the Shaft Cleaner until it clicks into place.
Note
•
Attach the cap from the new Shaft Cleaner on the used one. Be sure to put the used Shaft Cleaner
in the small box before putting it in the larger box with the used Maintenance Cartridge for disposal.
592 Maintenance