Loading and Printing on Rolls
These are the basic steps for loading and printing on rolls.
Follow the steps below to switch to a new roll or a roll of a different type or width before printing.
Note
•
The procedure varies depending on the ManageRemainRoll setting in the printer menu and whether or
not a barcode has been printed on the loaded roll. (→P.136)
•
Steps 6 and 7 are unnecessary if ManageRemainRoll is On and a barcode has been printed
on the roll.
•
Step 7 is unnecessary if ManageRemainRoll is Off.
•
If the Wheeled Output Stacker is installed, remove it in advance. (→P.159)
•
When Width Detection in the printer menu is Off, after you have selected the type of paper in step
6, you will need to enter the roll width. (→P.53)
•
For details on supported sizes and types of rolls, see "Paper Sizes" or the Paper Reference Guide.
(→P.109) (→P.104)
•
If you prefer to wait for the ink to dry after printing and simply eject the document, you can deactivate
automatic cutting and cut the paper manually. (→P.139)
1.
Turn the printer on. (→P.25)
2.
Select a roll as the paper source. (→P.112)
Printing procedure
Basic Printing Workow 89