Canon imagePROGRAF iPF820 User Manual page 307

Hide thumbs Also See for imagePROGRAF iPF820:
Table of Contents

Advertisement

Printing Vertical or Horizontal Banners (Large-Format
Printing; Mac OS X)
This topic describes how to print a banner about ve times as long as the roll width based on the following example.
Document: An original designed for a horizontal banner
Page size: Non-standard (100×500 mm [3.9×19.7 in.])
Paper: Roll
Paper type: Plain Paper
Roll paper width: 16 inches (406.4 mm)
Follow the steps below to print a banner in either horizontal or vertical format.
1.
In the application, create an original in the format of a horizontal or vertical banner.
2.
Register a "Custom Page Size."
Banners tend to be in non-standard sizes, so register a "Custom Page Size" in Page Setup. In this
example, 100×500 mm (3.9×19.7 in) is registered.
3.
Print the banner, using the settings that correspond to banners.
Note
The following procedures are based on Mac OS X 10.4. The method of setting up non-standard paper
sizes varies depending on the version of Mac OS X.
Printing banners or at other non-standard sizes
Enhanced Printing Options 293

Advertisement

Table of Contents
loading

This manual is also suitable for:

Imageprograf ipf820 proIpf820

Table of Contents