Register A Custom Page Size - Canon imagePROGRAF iPF820 User Manual

Printing banners or at other non-standard sizes

Register a Custom Page Size

This example describes how to register and print using a page size that is horizontally elongated and suitable
for banners in either horizontal or vertical format.
1.
Create the document in the application.
2.
Choose Page Setup in the application menu to display the Page Attributes dialog box.
3.
Select the printer in the
4.
Click Manage Custom Sizes in the
dialog box.
5.
Double-click Untitled in the list at left, and then enter a name for the page size you want
to register. Here, enter "100*500."
If the Untitled size is not listed at left, click + below the list.
6.
Under Page Size, enter "10" in Width and "50" in Height. Here, measurements are entered
in centimeters.
7.
Specify the margins by entering "0.3" in Printer Margins. Here, measurements are entered
in centimeters.
8.
Click OK to close the Custom Page Sizes dialog box.
9.
C
In the Paper Size list, click the size of the original. In this case, click "100*500," the size
you registered.
10.
D
In Orientation, click the icon of the document in landscape orientation.
11.
F
Click OK to close the dialog box.
294 Enhanced Printing Options
B
Format for list.
C
Paper Size list to display the Custom Page Sizes