Creating The Banner In The Application - Canon imagePROGRAF iPF820 User Manual

Hide thumbs Also See for imagePROGRAF iPF820:
Table of Contents

Advertisement

10.
Close the printer driver dialog box.
Note
You can also specify a Custom Size as the paper size. Note that Custom Size settings are not
available after you exit the application.
For more information, see "Printing on Non-Standard Paper Sizes (Windows)". (→P.298)

Creating the banner in the application

Follow the steps below to create the banner in Microsoft Word using the Custom Paper Size you registered.
1.
Start Microsoft Word.
2.
Choose Page Setup from the File menu to display the Page Setup dialog box.
3.
Under Paper Size, click the Custom Paper Size you registered-"My Horizontal Banner" in this
example.
Important
If "My Horizontal Banner" is not listed, make sure this printer is selected as the printer to use.
In applications such as Microsoft PowerPoint that do not enable you to choose registered paper
sizes, use the custom paper size setting in "Custom" and specify 100×500 mm (3.9×19.7 in).
4.
Set the printing orientation to horizontal.
5.
Create the banner.
Note
To create an original for large-format printing in Microsoft Word, you can use the imagePROGRAF Print
Plug-In for Word and follow simple instructions in the form of a wizard to prepare and print your original.
For details, see Print Plug-In for Word.
Printing banners or at other non-standard sizes
Enhanced Printing Options 289

Advertisement

Table of Contents
loading

This manual is also suitable for:

Imageprograf ipf820 proIpf820

Table of Contents