Printing Does Not Start; The Data Lamp On The Control Panel Does Not Light Up; The Printer Does Not Respond Even If Print Jobs Are Sent - Canon imagePROGRAF iPF820 User Manual

Hide thumbs Also See for imagePROGRAF iPF820:
Table of Contents

Advertisement

Printing does not start

The Data lamp on the Control Panel does not light up

Cause
The printer is not on.
The printer is not selected in the
printer driver. (The printer is in
Sleep mode.)
The print job is paused. (The
printer is in Sleep mode.)

The printer does not respond even if print jobs are sent

Cause
The printer is ofine.
You have printed when select Save
in mail box is selected in Output
Method.
The display screen indicates the system is lling with ink
Cause
The printer was forced off during
operation.
Make sure the power cord is securely plugged in, all the way. Press the
Power button to turn on the printer.
In Windows, select the printer by clicking Select Printer or Printer in
the printing dialog box and try printing again.
In Mac OS X, select the printer by clicking Printer Setup Utility (or
Print Center ) and try printing again.
In Windows, restart the print job as follows.
1.
Select the printer icon in the Printers and Faxes (or Printers )
window.
2.
Clear Pause Printing in the File menu to restart the print job.
In Mac OS X, restart the print job as follows.
1.
Open the Printer Setup Utility (or the Print Center ).
2.
Select the printer, and then Start Jobs in the Printers menu to
restart the print job.
Press the Online button on the Control Panel to bring the printer online.
Print the job saved on the printer's hard disk.
(→P.509)
Wait until the system has been lled with ink. This process may take
about ten minutes.
Corrective Action
Corrective Action
Corrective Action
Printing does not start
Troubleshooting 619

Advertisement

Table of Contents
loading

This manual is also suitable for:

Imageprograf ipf820 proIpf820

Table of Contents