9.
Access the Page Setup pane.
10.
A
In the
Paper Source list, click to select the feed method set for the specied paper. In this
case, select from Roll Paper (Auto), Roll Paper 1, or Roll Paper 2.
11.
Make sure the width of the loaded roll is displayed in the
ISO A2/A3 (420.0mm).
Note
•
If the width of the roll loaded in the printer is not shown in
Information on the Main pane to update the printer information.
Printing CAD Drawings
B
Roll Paper Width list-in this case,
B
Roll Paper Width, click
Working With Various Print Jobs 179
L
Printer