Note
•
For instructions on attaching the Roll Holder to rolls, see "Attaching the Roll Holder to Rolls".
(→P.115)
4.
Pull out the roll evenly on both ends and insert it in the Paper Feed Slot (a). Advance the roll until
the buzzer sounds.
Important
•
Be careful not to soil the printing surface of roll paper as you insert it in the slot. This may affect
the printing quality. We recommend wearing clean cloth gloves when handling rolls to protect the
printing surface.
•
If the paper is wrinkled or warped, straighten it out before loading it.
•
Load the roll so that there is no gap between the right edge of the paper and the Roll Holder.
5.
In a crouching position, push the Roll Unit into the printer.
Handling rolls
Handling Paper 123