Canon imagePROGRAF iPF820 User Manual page 462

Hide thumbs Also See for imagePROGRAF iPF820:
Table of Contents

Advertisement

Network Setting
Conguring the Printer's TCP/IP Network Settings
Follow the steps below to congure the TCP/IP network settings.
1.
Start the web browser and enter the following URL in the Location (or Address ) box to display
the RemoteUI page.
http://"printer IP address or name"/
Example: http://xxx.xxx.xxx.xxx/
2.
Select Administrator Mode and click Logon.
3.
If a password has been set on the printer, enter the password.
4.
Click Network in the Device Manager menu at left to display the Network page.
5.
Click Edit in the upper-right corner of the TCP/IP group to display the Edit TCP/IP Protocol
Settings page.
6.
Refer to the TCP/IP Settings Items table to complete the settings.
TCP/IP Settings Items
Use DHCP
Use BOOTP
Use RARP
Enable DNS Dynamic Update
Use Zeroconf Function
IP Address
Subnet Mask
Gateway Address
LPD Printing
IPP Printing
IPP Printer URI
RAW Printing
448 Network Setting
Item
Activate this setting to use DHCP
for conguring the IP address.
Activate this setting to use
BOOTP for conguring the IP
address.
Activate this setting to use RARP
for conguring the IP address.
Activate this setting to perform
DNS server registration
automatically.
Activate this setting to use
Bonjour.
Specify the printer's IP address.
Specify the printer's subnet mask. 0.0.0.0
Specify the printer's default
gateway.
Activate this setting to use LDP
Printing.
Activate this setting to use IPP
Printing.
Specify the URI of the printer
used for IPP printing using up to
252 characters.
When using a standard Windows
port for IPP printing, enter an
URL less than 255 bytes for
all characters for "http://"IP
address"/IPP-URI."
Activate this setting to use Raw
Printing.
Details
Off
Off
Off
Off
On
0.0.0.0
0.0.0.0
On
On
printer
On
Default Setting

Advertisement

Table of Contents
loading

This manual is also suitable for:

Imageprograf ipf820 proIpf820

Table of Contents