Canon imagePROGRAF iPF820 User Manual page 561

Hide thumbs Also See for imagePROGRAF iPF820:
Table of Contents

Advertisement

8.
Examine test pattern D-1 for printhead adjustment and determine the number of the pattern
with straight lines.
Note
If lines seem straightest in two patterns but you cannot decide which one is better, choose an
intermediate value. For example, choose 11 if you cannot decide whether pattern 10 or 12 is better.
9.
Press ▲ or ▼ to select the pattern number, and then press the OK button.
10.
Repeat steps 7 and 9 to specify the adjustment value for D-2 to D-5 and D-7 to D-11.
11.
Press the ◄ button.
12.
Press ▲ or ▼ to select Register Setting, and then press the ► button.
13.
Press ▲ or ▼ to select Yes, and then press the OK button.
The adjustment value is now registered, and adjustment is complete.
Adjusting the Printhead
Adjustments for Better Print Quality 547

Advertisement

Table of Contents
loading

This manual is also suitable for:

Imageprograf ipf820 proIpf820

Table of Contents