Automatic Roll Switching - Canon imagePROGRAF iPF820 User Manual

Hide thumbs Also See for imagePROGRAF iPF820:
Table of Contents

Advertisement

Handling rolls

Automatic Roll Switching

Two rolls can be loaded on the printer, in the Roll 1 (Upper) position and in the Roll 2 (Lower) position. Selecting
Roll Paper (Auto) in Paper Source in the printer driver enables automatic selection and printing on the roll that
suits the print job from the loaded rolls.
The printer determines which roll to use based on these conditions, in the following order.
Note
If an error message is displayed, neither paper feed slot is loaded with paper suitable for the print job.
Check the print job and replace the paper. (→P.125)
1.
When ManageRemainRoll in the printer menu is set to On, the roll longer than the length of a
single page of the print job is used.
When ManageRemainRoll is set to Off and both rolls are longer than the print job, the second
condition determines which roll is used.
Note
When the roll currently advanced is a type of paper that cannot be cut and the printed pages have
not been cut, the currently advanced roll is used.
If both rolls are too short, an error message is displayed.
2.
Use a type of paper that matches the print job.
When both or neither loaded roll matches the type of paper in the print job, the third condition
determines which roll is used.
Note
When Detect Mismatch in the printer menu is set to Warning or None, the roll is determined
by the following conditions.
When neither loaded roll matches the type of paper in the print job and Detect Mismatch in the
printer menu is set to Pause, an error message is displayed.
3.
If Roll Switching in the printer menu is set to No RollSwitching, the currently advanced roll is
used.
If Roll Switching in the printer menu is set to Use Optimal Size, the fourth condition determines
which roll is used.
4.
When the print job calls for borderless printing, the roll compatible with borderless printing is used.
When the print job does not specify borderless printing, or if both rolls are compatible with
borderless printing, the fth condition determines which roll is used.
Note
If neither roll is compatible with borderless printing, an error message is displayed.
146 Handling Paper

Advertisement

Table of Contents
loading

This manual is also suitable for:

Imageprograf ipf820 proIpf820

Table of Contents