Canon imagePROGRAF iPF820 User Manual page 315

8.
O
Click Paper Size Options to display the Paper Size Options dialog box.
9.
Complete the following settings in the Paper Size Options dialog box.
1.
Enter a desired paper name in
example.
2.
Conrm that mm is selected in
3.
E
Under Paper Size, enter "430" in both Width and Height.
Note
•
If you select the Fix the Ratio of the Width to Height check box, after you enter a value in either
Width or Height, the other value will be automatically applied based on the original aspect ratio.
10.
F
Click Add to register "430 mm Square".
11.
Click OK to close the Paper Size Options dialog box.
12.
Make sure the Custom Paper Size Name you specied in Page Setup >
selected-in this case, "430 mm Square."
13.
Click Cut Sheet in the
14.
Conrm the print settings and print as desired.
Note
•
For tips on conrming print settings, see "Conrming Print Settings (Windows)". (→P.374)
C
Custom Paper Size Name. "430 mm Square" is used in this
D
Units.
L
Paper Source list.
Printing banners or at other non-standard sizes
Enhanced Printing Options 301
A
Page Size is