Handling rolls
Loading rolls in the Roll 2 (Lower) holder
Caution
•
Do not detach the Roll Unit in the following cases.
•
During printing
Vibration from removing the Roll Unit may affect the printing quality.
•
If a sheet is loaded in the printer
The sheet may be ejected, and (rarely) it may be bent.
1.
Conrm that a roll is selected as the paper source. (→P.112)
2.
Holding the Roll Unit Lever (a), pull out the Roll Unit.
3.
Holding the Roll Holder so that the side with the white gear faces the side of the Roll Holder
Slot with a white gear, load the Roll Holder shaft (a) into the grooves (b) on both ends of the
Roll Holder Slot.
Caution
•
Be careful not to drop the roll and hurt yourself when loading it.
•
Be careful not to pinch your ngers between the Roll Holder shaft (a) and the guide grooves
(b) when loading rolls.
122 Handling Paper