Setting The Blue Switch On The Platen - Canon imagePROGRAF iPF820 User Manual

Setting the Blue Switch on the Platen

If printed documents exhibit the following symptoms, adjust the setting of the blue Switch on the Platen.
•
Image edges are blurred
•
Image edges are affected by white banding
Important
•
Always set the blue Switch on the Platen to the ● side for borderless printing. Printing quality may be
affected if the Switch is incorrectly set.
1.
Remove any loaded paper that will not be used.
•
Rolls (→P.125)
•
Sheet (→P.155)
2.
Open the Top Cover.
3.
Remove the Cleaning Brush.
4.
Using the back of the Cleaning Brush, move the rst Switch to the side opposite ●.
Problems with the printing quality
Troubleshooting 629