Canon imagePROGRAF iPF820 User Manual page 459

Hide thumbs Also See for imagePROGRAF iPF820:
Table of Contents

Advertisement

Conguring the IP Address Using the Printer Control
Panel
This topic describes how to congure the printer's IP address on the Control Panel.
1.
Press the Menu button to display MAIN MENU.
2.
Press ▲ or ▼ to select Interface Setup, and then press the ► button.
3.
Press ▲ or ▼ to select TCP/IP, and then press the ► button.
4.
Press ▲ or ▼ to select IP Setting, and then press the ► button.
5.
Press ▲ or ▼ to select IP Address, and then press the ► button.
6.
After you press ◄ or ► to select the input eld, numerical input is possible.
7.
Press the ▲ or ▼ button to enter the value.
Note
Pressing the ▲ button increases the number by 1. The maximum value is "255," after which "0" is
displayed.
Pressing the ▼ button decreases the number by 1. The minimum value is "0," after which "255" is
displayed.
Hold down ▲ or ▼ to increase or decrease the value continuously.
8.
Repeat steps 6-7 to enter the IP address assigned to the printer.
9.
Press the Online button to bring the printer online.
If any settings are changed, a conrmation message is displayed. In this case, press the OK
button.
Important
Be sure to complete step 9. This will activate the values you have entered.
You can also specify the subnet mask and default gateway on the Control Panel.
Note
If an error message is displayed, check the settings and correct any invalid values.
To cancel the setup process, hold down the Stop button for a second or more.
Network Setting
Network Setting 445

Advertisement

Table of Contents
loading

This manual is also suitable for:

Imageprograf ipf820 proIpf820

Table of Contents