8.
Access the Page Setup pane.
9.
A
In the
Paper Source list, click to select the feed method set for the specied paper. In this
case, select from Roll Paper (Auto), Roll Paper 1, or Roll Paper 2.
10.
Make sure the width of the loaded roll is displayed in
A3/A4 (297.0mm).
Note
•
If the width of the roll loaded in the printer is not shown in
Information on the Main pane to update the printer information.
B
Roll Paper Width -in this case, ISO
B
Roll Paper Width, click
Enhanced Printing Options 339
Conserving roll paper
L
Printer