Canon imagePROGRAF iPF820 User Manual page 305

8.
C
Select the Enlarged/Reduced Printing check box.
Note
•
If the Enlarged/Reduced Printing check box is not displayed on the Page Setup sheet, clear the
B
Borderless Printing check box.
9.
L
In the Paper Source list, click to select the feed method set for the specied paper. In this
case, choose from Roll Paper (Auto), Roll Paper 1, or Roll Paper 2.
10.
E
After you click
11.
Select the width of the loaded roll in the Roll Paper Width list. In this case, click 16-in. Roll
(406.4mm), and then click OK.
Fit Roll Paper Width, the Information dialog box is displayed.
Printing banners or at other non-standard sizes
Enhanced Printing Options 291