Canon imagePROGRAF iPF820 User Manual page 649

Hide thumbs Also See for imagePROGRAF iPF820:
Table of Contents

Advertisement

Conguring the Communication Mode Manually
This topic gives instructions for conguring the communication mode manually.
1.
Press the Menu button to display MAIN MENU.
2.
Press ▲ or ▼ to select Interface Setup, and then press the ► button.
3.
Press ▲ or ▼ to select Ethernet Driver, and then press the ► button.
4.
Press ▲ or ▼ to select Auto Detect, and then press the ► button.
5.
Press ▲ or ▼ to select Off, and then press the OK button.
Return to the Ethernet Driver menu.
6.
Press ▲ or ▼ to select Comm.Mode, and then press the ► button.
7.
Press ▲ or ▼ to select the communication mode, and then press the OK button.
Return to the Ethernet Driver menu.
8.
Press ▲ or ▼ to select Ethernet Type, and then press the ► button.
9.
Press ▲ or ▼ to select the Ethernet type, and then press the OK button.
Return to the Ethernet Driver menu.
10.
Press ▲ or ▼ to select Spanning Tree, and then press the ► button.
11.
Press ▲ or ▼ to enable or disable spanning tree support, and then press the OK button.
Return to the Ethernet Driver menu.
12.
Press the Online button.
After the conrmation message is displayed, press OK.
The new settings will take effect after the printer restarts.
Cannot print over a network
Troubleshooting 635

Advertisement

Table of Contents
loading

This manual is also suitable for:

Imageprograf ipf820 proIpf820

Table of Contents