Setting The Blue Switch On The Platen - Canon IPF850 User Manual

Setting the Blue Switch on the Platen

Cause
The type of paper specified in the
printer driver does not match the type
loaded in the printer.
Setting the Blue Switch on the Platen
Setting the Blue Switch on the Platen
If printed documents exhibit the following symptoms, adjust the setting of the blue Switch on the Platen.
• Image edges are blurred
Image edges are affected by white banding
•
•
Always set all of the blue Switches on the Platen to the ● side for borderless printing. If the Switch are not set
correctly, the print quality may deteriorate.
Important
1
Remove the Stacker from the printer.
(See "Installing and Removing the Stacker On the Printer.")
2
Remove any loaded paper that will not be used.
Rolls (See "Removing the Roll from the Printer.")
•
• Sheet (See "Removing Sheets.")
3
Open the Top Cover.
4
Remove the Cleaning Brush (a).
638
2.
Change the type of paper in the printer driver and try printing again.
P.373
➔
Corrective Action
P.376
➔
P.352
➔
iPF850
User's Guide