Server Setup Options - Oki C9800hdtn Configuration Manual

4

4-5 Server Setup options

Server Setup options
The Server Setup menu lets you specify system information that pertains to the Fiery
and all users. To access the menu, follow the instructions on page 4-3.
When you choose Server Setup, the options appear in sequence, as follows. Default
values, where applicable, appear in square brackets. Words shown in italics indicate
that a product- or site-specific value is displayed.
Server Name
Default server name
Enter a name for the Fiery (up to 15 characters long). This name appears in the
Chooser on an AppleTalk network.
System Date
Enter the correct system date in the form DD/MM/YY. The date appears on the Job
Log.
System Time
Enter the correct system time. Enter the time based on the 24-hour clock in the form
HH:MM (Hours:Minutes). The time appears on the Job Log.
Time Zone
Specify the correct time zone. Select from a list of major cities and standard time zones.
Location
Specify where the printer is located e.g. Office, 4th Floor.
Print Start Page
Yes/No [Yes]
Specify whether the Fiery should print a start page every time it restarts. The start page
displays information about the Fiery, including the server name, current date and time,
amount of memory installed in the Fiery, network protocols enabled, and connections
published.