Figure 73. Disconnecting Power Cables (Sr1530Cl) - Intel SR1530CL User Manual

2. Power down the server and unplug all peripheral devices and the AC power cable.
3. Remove the server system cover. For instructions, see
System
4. Disconnect all power cables connected to the server board and peripherals:
— A: Aux power signal
— B: 2x12 main power connector
— C: 2x4 power connector
— D: Daisy-chain cable to:
.
72
Cover".
✧ Optical drive power, if optical drive is installed
✧ HDD0 power connector, if a hard drive is installed here
✧ HDD1 power connector, if a hard drive is installed here
D

Figure 73. Disconnecting Power Cables (SR1530CL)

A
®
Intel Server System SR1530CL / SR1530HCL / SR1530HCLS
"Removing the Server
B
C
AF000998