Hardware Installations And Upgrades; Before You Begin; Tools And Supplies Needed; System References - Intel SS4200-E - Entry Storage System NAS Server User Manual

4
Hardware Installations and
Upgrades
This chapter provides instructions for removing, installing, and replacing storage system
components in your Intel
Caution: When connecting the Intel
the power cord that shipped with the system, or match the power cord specifications listed
under "Power Cord" on page
Caution: It is recommended that you fit and check a suitable anti-static wristband and conductive
foam pad and observe all conventional ESD precautions when handling storage system
components.

Before You Begin

Before working with your storage system, review the important ESD precaution and
safety information listed in

Tools and Supplies Needed

•
Phillips* (cross head) screwdriver (#1 bit and #2 bit)
•
Needle-nosed pliers
•
Anti-static wrist strap and conductive foam pad (recommended)

System References

All references to left, right, front, top, and bottom assume the reader is facing the front of
the storage system.

Installing Feet

The Intel
the system for either horizontal or vertical orientation.
Note: Feet should be installed for system stability and rotational vibration dampening.
Intel® Entry Storage System SS4200-E User Guide
®
Entry Storage System SS4200-E.
®
Entry Storage System SS4200-E to a power source, use either
56.
"Safety Information" on page
®
Entry Storage System SS4200-E ships with no feet installed. You can configure
85.
15